VERITAS NetBackup 5230 Hardware Installation Guide

LED descriptionNumber
Cold reset button (instantly restarts the appliance)4
NIC4/eth3 activity5
NIC3/eth2 activity6
NMI button (This button triggers a non-maskable interrupt. All server
data is lost.)
7
NIC1/eth0 activity8
NIC2/eth1 activity9
Status10
■ Check the power supply module LEDs on the rear panel. Each module has
one LED.
Configuring the IPMI from the NetBackup
Appliance Shell Menu
This section explains how to configure IPMI from the NetBackup Appliance Shell
Menu.
Before starting the IPMI configuration, obtain the following information for the
appliance for which you want to configure the IPMI:
IP address for the remote management port so that the default static IP
address of the remote management port can be changed.
IP address
Enable connectivity between your network computer and the remote
management port.
Subnet mask
Enable connectivity between your network computer and the remote
management port.
Gateway IP
address
42Verifying hardware operation and configuring IPMI
Configuring the IPMI from the NetBackup Appliance Shell Menu

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)