VERITAS NetBackup 5230 Hardware Installation Guide

The Status LED (1) should not be lit. The following indications are possible:
■ A solid, amber, LED indicates a disk fault.
■ A blinking, amber, LED indicates that a RAID rebuild is in progress.
The Activity LED (2) indicates the following:
■ The LED is not lit when the disk has spun down, although power is on.
■ The LED is solid green when there is no disk activity, although power
is on.
■ The LED blinks green when the disk spins up.
■ The LED blinks green occasionally when commands are processed.
■ Review all LEDs on the front control panel.
LED descriptionNumber
AC power button with integrated LED1
Hard drive activity2
ID button with integrated LED3
41Verifying hardware operation and configuring IPMI
Turning on the appliance

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)