VERITAS NetBackup 5230 Hardware Installation Guide

7
Verify that the LEDs on the rear panel of the storage shelf show correct
operation.
DetailsElementNumber
Not lit - no link availableSAS_IN port LED1
Solid green - link available
Flashes green - activity
Red - power supply failure
Connected to the applianceSAS_IN port2
Connected to a second storage shelf, if usedSAS_OUT port3
Not lit - no link availableSAS_OUT port LED4
Solid green - link available
Flashes green - activity
Red - power supply failure
Not lit - offI/O module LED5
Solid green - ready (optimal)
Flashes green - N/A
Red - starting up
Not lit - power is not detectedPower supply LED6
Solid green - power is ok
Flashes green - power supply is not turned on
Red - power cannot be turned on
39Verifying hardware operation and configuring IPMI
Turning on the storage shelves

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)