VERITAS NetBackup 5230 Hardware Installation Guide

■ Set the air duct aside in a safe location.
2
Obtain the DIMMs from the Expansion Storage Kit.
3
Locate the DIMM sockets next to the CPUs on the mainboard.
A blank card is installed in each memory socket that is not used.
4
Install the new DIMM cards in slots A2, B2, C2, D2, E2, F2, G2, and H2 as
follows:
■ In each slot that requires new memory, remove the blank DIMM card. Open
the retaining clips (A) at each end of the socket and remove the blank card.
54Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
Installing the additional memory

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)