VERITAS NetBackup 5230 Hardware Installation Guide

5
Align the edge connector on the card with the bottom PCIe-card socket (or slot
1). The edge connector is keyed to install one way only.
6
Firmly and evenly insert the card in the socket.
7
Use the screw you removed earlier to secure the RAID controller card in the
PCIe riser assembly.
8
Connect the cable on the MFBU to the separate cable from the kit.
60Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
Installing the external RAID controller card

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)