05 / CONFIGURING
ADVANCED SETTINGS
97
http://setup.verizon.com/businessinternetgateway |
©2024 Verizon. All Rights Reserved
LAN IPv6 Configuration without An IPv6 WAN Connection
1. To configure IPv6 to use either the IPv6 LAN Stateful or Stateless mode
without using an IPv6 Internet WAN connection, select the None option
on the IPv6 Configuration Controls page.
2. After entering all appropriate IPv6 settings, click Apply changes to have
changes take effect.
LAN IPv6 Stateful (DhCPv6) with No WAN Settings
1. To configure IPv6 LAN Stateful mode with no WAN connection, select
the Stateful option on the IPv6 Configuration Controls page as shown
below:
To Next Page
Loading...
