NETWORK SETTINGS
2. Specify the Stateful (DHCPv6) settings to be used to assign LAN IPv6
addresses by entering the following details:
• IPv6 LAN Configuration (select Stateful from the dropdown list)
• DHCPv6 Client Address Range (start and end)
• LAN Link Local Address (automatically populated)
• Router Advertisement Lifetime (minutes between 0-150)
• IPv6 Address Lifetime (minutes between 3-150)
• Option: Allow ICMPv6 Echo Request for LAN devices using their
Global IPv6 Address from WAN side - requesting an IPv6 address
from any available DHCPv6 servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply changes to have
changes take effect.
To Next Page
Loading...
