Configuration Parameters D-2
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
Configuration Parameters
Section Field Name Description
LAN network_mode Sets use of DHCP or static addressing. In static mode, IP
parameters are set manually. In DHCP, the IP Phone requests
addresses from the local DHCP server including Options below:
Option #1: Subnet Mask
Option #2 : Time offset in secs of the local time zone from GMT.
Option #3 : Default gateway (router) IP address
Option #6 : DNS server IP address
Option #42 : SNTP server IP address
Option #50 : IP address of the phone
Option #66 : TFTP server name
Option #150 : TFTP server IP address, has priority over Option
#66 when set
Option #160 : HTTPS URL for provisioning, has priority over
Option #66 and #150
Valid values are static and dhcp.
Default is dhcp.
ipAddress The phone’s IP address.
Valid value is an IP address.
Default is “192.168.1.1”.
defaultGateway The phone's default gateway.
Valid value is an IP address.
Default is "192.168.1.254"
subnetMask The phone’s subnet-mask.
Valid value is a subnet-mask.
Default is “255.255.255.0”.
dns1_address IP address of the primary DNS server used to resolve names to
IP addresses.
Valid value is an IP address.
Default is blank.
dns2_address Optional IP address for a secondary DNS server; used if the
primary DNS server is unavailable.
Valid value is an IP address.
Default is blank.
domain_name Not used
To Next Page
Loading...
