Configuration Parameters D-5
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
NETTIME dst_stop_day Sets day of the month DST ends.
Valid values are as follows:
•
1 to 31 (for the days of the month)
• 0 (use the value in the dst_stop_day_of_week
parameter)
The default is 0.
dst_stop_day_of_week Sets day of the week DST ends.
Valid values are 1 to 7, with 1 being Sunday and 7 being
Saturday.
The default is 1 for the United States.
dst_stop_week_of_month Sets week of month DST ends.
Valid values are 1 to 6 and 7, with 1 being the first week, each
number thereafter being subsequent weeks. Seven (7)
represents the last week in the month
The default is 1 for the United States.
dst_stop_time Sets the hour of the day DST ends.
Valid values are 0 to 23.
The default is 2 for the United States.
VOIP outbound_proxy_server When defined, sends all SIP requests to the outbound proxy
server instead of to the linen_proxy_address. The media stream
is not routed through the outbound proxy.
The valid value is an IP address or FQDN.
Default is blank.
outbound_proxy_port Defines the port number of the outbound proxy server.
Valid values are 1024 to 32000.
Default is 5060.
backup_proxy_server Defines a backup proxy server in case the outbound proxy
server fails.
The valid value is an IP address or FQDN.
Default is blank .
back_proxy_port Defines the port number of the backup proxy server.
Valid values are 1024 to 32000.
Default is 5060.
message_url Defines the voice mail address, IP address or phone number
format.
The valid value is an IP address or telephone number.
Default is blank.
Section Field Name Description
To Next Page
Loading...
