Configuration Parameters D-13
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
DSP cadence7 Sets the ring cadence for calls with community - 1 call in Alert
Info header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 1500-500-500-3500-0-0-0-0
cadence8 Sets the ring cadence for calls with community - 2 call in Alert
Info header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 1500-500-500-500-500-2500-0-0
cadence9 Sets the ring cadence for calls with community - 3 call in Alert
Info header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 1500-500-500-500-1000-2000-0-0
cadence10 Sets the ring cadence for calls with community - 4 call in Alert
Info header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 500 500 500 500 500 500 500 2500
cadence11 Sets the ring cadence for calls with auto answer call in Alert Info
header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 500 500 500 500 2500 3500 0 0
frame_duration Sets the RTP frame duration in milliseconds.
Valid values are 10 to 100.
The default is 20.
jitterbuffer_min_delay Sets the minimum jitter buffer size, in milliseconds. The Jitter
buffer parameters control the buffer size for out-of-sequence
packets. Using larger values produce less packet loss as the IP
Phone will wait longer for receipt of packets. However, large
values may delay voice packet processing. Smaller values may
produce more packet loss but quicker voice packet processing.
Valid values are 0 to 150.
The default is 30.
Section Field Name Description
To Next Page
Loading...
