Configuration Parameters D-12
Appendix D: Using the Configuration File
Edge 5000 Installation / Configuration Guide
DSP cadence0 Sets the ring cadence for calls with undefined in Alert Info
header.
The valid value is a six value time array (on off on off on off). The
valid range is 0 to 30000 milliseconds total time.
The default is 2000-4000-0-0-0-0.
cadence1 Sets the ring cadence for calls with External call in Alert Info
header.
The valid value is a six value time array (on off on off on off). The
valid range is 0 to 30000 milliseconds total time.
The default is 800-400-800-4000-0-0.
cadence2 Sets the ring cadence for calls with Group call in Alert Info
header.
The valid value is a six value time array (on off on off on off). The
valid range is 0 to 30000 milliseconds total time.
The default is 400-200-400-200-800-4000.
cadence3 Sets the ring cadence for calls with Internal call in Alert Info
header.
The valid value is a six value time array (on off on off on off). The
valid range is 0 to 30000 milliseconds total time.
The default is 300-200-1000-200-300-4000
cadence4 Sets the ring cadence for calls with ACD call in Alert Info header.
The valid value is a six value time array (on off on off on off). The
valid range is 0 to 30000 milliseconds total time.
The default is 500-0-0-0-0-0
cadence5 Sets the ring cadence for calls with priority call in Alert Info
header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 1500-4500-0-0-0-0-0-0
cadence6 Sets the ring cadence for calls with emergency call in Alert Info
header.
The valid value is an eight value time array (on off on off on off
on off). The valid range is 0 to 30000 milliseconds total time.
The default is 1500-500-1500-2500-0-0-0-0
Section Field Name Description
To Next Page
Loading...
