VoIP Configuration 4-5
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
At the top of the VoIP screen is a table indicating the SIP lines available. Selecting a line from
the list will display the characteristics assigned for the line.
Within the VoIP screen, adjustable parameters are:
- Line based parameters
• Proxy Server Address
is the IP address or FQDN of the SIP call server or SIP proxy.
• Proxy Port
is the server port for incoming requests and outgoing responses
• Display Name
is the name used as part of the IP Phone caller ID. The display name
assigned for Line1 displays on the LCD display.
•Name
is the name used during registration. The name is generally the telephone
number or the SIP user Id.
• Authentication Name
is the user id for authentication of the line appearance with the
call server.
• Authentication Password
is the password for authentication of the line appearance
with the call server.
• Line Type
is the type of line (private, shared (BLA), or DSS line), see page 3-18.
• Ring Type
sets the ring tone for incoming calls on the line. The Ring Type can be "Set
as Default", "Ringer Off" or Ring type 1 to 4, 101 to 105 or 201 to 205. The default ring
is configured under the Phone Settings, see
page 4-18.
• Delayed Ring
delays audible notification (ring) for a line. The delay is set in 1-second
increments from 0 (no delay) to 10 seconds.
- General Parameters
• Outbound Proxy Address
is the IP address or FQDN of the outbound proxy server to
receive SIP requests in place of the line-based Proxy Server.
• Outbound Proxy Port
is the port of the outbound proxy server
• Backup Proxy Address
is the IP address or FQDN of the backup proxy server, used
when the connection with the primary proxy times-out.
• Backup Proxy Port
is the port of the backup proxy server
• Domain
is the domain for SIP service when the service provider desires to use a
specific SIP domain.
•VMS Address
is the address (IP or phone number) of the Voice Mail Server.
• Proxy Registration enables SIP registration to the proxy; this parameter is ignored if
an Outbound Proxy Address is not defined.
• Registration Timer
is the interval, in seconds, between SIP registration renewal
attempts.
• Local UDP Port
is the UDP port used on the LAN for sending and receiving SIP
packets.
To Next Page
Loading...
