EasyManua.ls Logo

Vertical Edge 5000 - Page 84

Vertical Edge 5000
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VoIP Configuration 4-6
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
Start RTP Port is the port for Real-time Transport Protocol (voice) packets.
Codec
selects the priority for audio codecs.
Centralized Conference
- This parameter enables or disables server control and processing of conferences.
When enabled, the server provides a single RTP stream for the conference.
When disabled, the IP Phone processes separate RTP streams for each
participant, maximum 3-parties. A URL is required for Centralized conference.
- URL is the URL of the conference server.
BLF
- This parameter enables or disables use of the BLF function that provides a
location for BLF (Busy Lamp Field) indications for all DSS line types. A URL is
required.
- URL defines the server where the IP Phone can retrieve BLF information for DSS
line types.
STUN Server Address
, STUN server IP address or FQDN.
To modify a parameter:
Select the parameter and modify the value.
Select the button.
NOTE: Changing the proxy server address, proxy port by line and outbound proxy, backup proxy, VMS
address or local UDP port requires a reboot of the IP Phone. When you leave the menu, you will
receive a reboot notice. The IP Phone must reboot to utilize the new values entered.
Release 1.0
September 2010

Table of Contents

Related product manuals