Routing Table 4-13
Chapter 4: Using Web Manager for Configuration
Edge 5000 Installation / Configuration Guide
Complex Dial Plan
Customer requirements:
Process the call after the local operator at 0, long distance operator at 00, a four-digit local
extension number starting with 3,4 or 5, a seven-digit local number prefixed by an 8,
two-digit number preceded by star ('*'), a ten digit long distance number prefixed by 91, or
an international number starting with 9011 is dialed.
2nd Dial Tone
Customer requirements:
To provide second dial tone after a '9' is dialed, establish a Dial Plan as below.
To change Routing Table parameters:
• Assure the Routing Table radial button is selected under the Dial Plan Type
• Enter the desired values into the respective boxes.
• Select the button.
Number TRNC Pre Post Pause Extra
0? 0 NULL NULL ?, 0.0.0.0
00 0 NULL NULL NULL 0.0.0.0
3??? 0 NULL NULL NULL 0.0.0.0
4??? 0 NULL NULL NULL 0.0.0.0
5??? 0 NULL NULL NULL 0.0.0.0
8??????? 0 NULL NULL NULL 0.0.0.0
*?? 0 NULL NULL NULL 0.0.0.0
91?????????? 0 NULL NULL NULL 0.0.0.0
0 9011~ 0 NULL NULL NULL 0.0.0.0
Number TRNC Pre Post Pause Extra
9.~ 0 NULL NULL ?, 0.0.0.0
To Next Page
Loading...
