• Sunday - Saturday (Wednesday is default)
Battery periodic test time
Sets the time that the battery periodic test is performed.
• 00:00 - 23:59 (default is 00:00)
Batt. note duration (month)
Sets the length of time after the batteries are replaced to generate an alarm to remind the user to replace the
batteries.
• Disable (default)
• 1 - 72 months
Dischg protect time
Sets the maximum discharge time for the UPS. The default setting is the maximum allowing the battery to fully
discharge. This can be set lower to limit the amount of time the UPS will provide battery protection after which it
will shut down. If the discharge time remaining on the battery is lower than the setting value, it will have no effect.
• 1 - 4320 minutes (default of 4320)
Equal charge enable
Sets the charge mode of the battery. Equal charge mode is a quick charge mode that can reduce the amount of
time needed to charge the battery. Float charge mode can have a longer battery life.
• Enable — Equal charge mode
• Disable — Float charge mode (default)
Replace battery
Activates newly installed battery packs after replacement and reset all battery statistics for new battery packs.
• Provides a confirmation window with Yes/No options to confirm replacement of batteries.
Monitor Settings Options
Language
Selects the language of the display, see Selecting the Display Language on page56.
• English (default)
• French
• Portuguese
• Spanish
• Chinese
• German
• Japanese
• Russian
Date
Selects the current date for the UPS display, YYYY-MM-DD. See Setting the Date and Time on page56.
5 Operation and Display Panel Proprietary and Confidential ©2024 Vertiv Group Corp. 45
Vertiv™ Liebert® GXT5 UPS Installer/User Guide
To Next Page
Loading...
Need help?
General
