70
Vertiv I Liebert LPC I User Manual
Do not change the default configurations of the alarm set points. However, if
modifying or changing the set points is a requirement, then ensure that the set
points are changed under the guidance of trained professionals.
4.6.5 Alarm Process
The Alarm Process function deals with the settings related to the maintenance and
replacement of the filter. It can be configured so that an alarm alert will be generated once
the due date arrives.
This facilitates the periodic checking and upkeep of the filter. If the Filter Maintenance is set
to Yes, clear the filter running time to zero.
Figure 4-10 Alarm Process
4.6.6 Temperature & Humidity Setup
This function is used to set the temperature and humidity settings.
• In the Main Menu (1/2), move the cursor to the Set Point control by using the Up and
Down keys.
• Press the Enter key to explore the sub-menu of the Set Point Control Interface.
The options in the sub-menu are used to set the temperature, humidity, and altitude of the
operational unit.
Figure 4-11 shows the interface of the Temperature and Humidity settings menu:
To Next Page
Loading...
Need help?
General
