Remote Commands
SCPI Commands Command Tables
MAP-200 Optical Switch mOSW-C1 Installation and User Guide Standard
June 2016 Document Number 22112369-120 R000 Page 66
*RCL
Description
The *RCL command recalls the stored status of system and all the applications which is
stored by *SAV command with the specified number. All the status will be recovered right
after this command is issued. The interlock will be turned on during recovering and then will
be restored to the state as before this command is issued.
Input format
*RCL <number>
<number>* Numeric 0 – 6
* <number> 0 is reserved for the factory default settings; <number> 1 is reserved for the power-off status; All the others can be
used by the user.
Output format
None.
Default
0
Errors
Standard error messages.
Example
*RCL <number>
Terminal input:
*RCL 0
This example restores the factory settings.
To Next Page
Loading...
