Viavi MAP-200 - :STATus:RESet; :ROUTe:CLOSe

Remote Commands
Common Application Commands
MAP-200 Optical Switch mOSW-C1 Installation and User Guide Standard
June 2016 Document Number 22112369-120 R000 Page 83
:STATus:RESet
Description
Clears the device status register.
Input Format
:STATus:RESet <D>
Output Format
None.
User Commands
:ROUTe:CLOSe
Description
Set new optical connection for selected switch device.
Input Format
:ROUTe:CLOSe <D>,<Input>,<Output>
Parameter
Type
Value
Input
Integer
1* -- max input channel
Output
Integer
0** -- max output channel
*See CONFig? query command description.
**Not all switches may have a 0 (off) channel.
Output Format
None
Default
0
Example
The following example sets input 1 to output 20 for device 1.
Terminal Input:
:ROUT:CLOS 1,1,20