Remote Commands
Common Application Commands
MAP-200 Optical Switch mOSW-C1 Installation and User Guide Standard
June 2016 Document Number 22112369-120 R000 Page 85
:ROUTe:TRIM
Description
Set trim for the switch device. The command only works for the switch device that has trim
capability. The trim level is reset, when the switch position is moved.
Input Format
:ROUTe:TRIM <D>,<level>
Output Format
None
Default
0
Example
The following example sets trim for the device 1 to level 10.
Terminal Input:
:ROUT:TRIM 1,10
To Next Page
Loading...
