Remote Commands
Common Application Commands
MAP-200 Optical Switch mOSW-C1 Installation and User Guide Standard
June 2016 Document Number 22112369-120 R000 Page 87
:ROUTe:WAVelength
Description
Set wavelength for the switch device. The command only works for the switch device that
has optical power monitor.
Input Format
:ROUTe:WAVelength <D>,<wavelength>
wavelength Float
min wavelength – max
wavelength
Output Format
None
Default
0
Example
The following example sets wavelength for the device 1 to 1550 nm.
Terminal Input:
:ROUT:WAV 1,1550
To Next Page
Loading...
