Remote Commands
Common Application Commands
MAP-200 Optical Switch mOSW-C1 Installation and User Guide Standard
June 2016 Document Number 22112369-120 R000 Page 69
:RESet
Description
Reset cassette to its default state. Perform the same reset as *RST.
Card reset commands simulates a hot-swap or card power-up event. The card may briefly
appear to have disappeared from the system. This is normal until the system acquires and
configures the card.
Input Format
:RESet
Output Format
None.
Errors
Standard error messages.
Example
The following example resets all devices on the specific card.
Terminal Input:
:RES
To Next Page
Loading...
