1. Safety instructions
SAVE THESE INSTRUCTIONS – This manual contains important instructions that shall be followed
during installation, setup, operation and maintenance.
• Please read this manual carefully before the product is installed and put into use
• Make sure you have the latest version of the manual. The most recent version can be downloaded from the product page.
• Install the product in a heatproof environment. Ensure therefore that there are no chemicals, plastic parts, curtains or other
textiles, etc. in the immediate vicinity of the equipment.
• Ensure that the equipment is used under the correct operating conditions. Never operate it in a wet environment.
• Never use the product at sites where gas or dust explosions could occur
• This device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction.
Color Control GX Manual
Page 1 Safety instructions
To Next Page
Loading...
