2.C Specify Basic WAN Services
WAN Service Type: PPPoE
(PPPoA is only available if selected during
ATM Creation; if this is the case, then there
will be no option to select services)
Service Description: User Defined
802.1p: If untagged, leave as -1 (Null)
802.1q: If untagged, leave as -1 (Null)
Network Protocol: IPv4, Dual Stack, or IPv6
Once complete, select “Next”
VisionNet M504 / M505N R3 Page 29 of 62 User Manual Rev 0.1c
To Next Page
Loading...
