SECTION 1: MANAGEMENT ACCESS
SECTION 1.1 UNDERSTANDING YOUR DOCUMENTATION
Item 1 Obtaining the most recent documentation from your VisionNet Sales Engineer
Only pre-approved ILEC/CLEC representatives may receive documentation . If you are not recognized on that list,
please ask the authorized company representative to add you to our list.
Item 2 You will receive the following files:
Configuration File
This is the generic xml file, used at the time of customization,
sans device unique parameters
Customer Configuration Form
This is the explanatory form that summarizes the contents of the
configuration, and includes passwords in plain-text.
This form should only be distributed to authorized employees
Optional: Logo The VisionNet Logo may be replaced by a custom .png or gif file
Optional: DNS Redirect Branding
The custom DNS Redirect, used for DSL Sync and PPP
Troubleshooting, may be over-written with a custom html file
including contact information and instructions.
Item 3 Types of configurations kept for records:
Shipping Configurations
These configurations are approved for shipping, and may be
referenced by POs, for use. Shipping configuration changes
must be requested by authorized technical representatives
Alternate Configurations
These configurations are not used for shipping, but are
recognized as approved for deployment. These may be provided
to technicians upon request.
Testing Configurations
These configurations are not used for shipping, or recognized for
deployment. They are for testing, development, or are being
considered for final approval.
VisionNet M504 / M505N R3 Page 6 of 62 User Manual Rev 0.1c
To Next Page
Loading...
