SECTION 7: IPv4 DNS CONFIGURATION
SECTION 7.1 GLOBAL DNS PRIORITIZATION
Abstract
Once routed WAN services have been created, you may prioritize the dynamically assigned DNS servers that the CPE
utilizes for DNS resolution.
Step 1 Direct your browser to the IF Default DNS page
1.A In the left-hand navigation pane, select:
DNS
IF Default DNS
Step 2 Prioritize DNS Server Paths
2.A Select IFs for DNS Resolution
Available Interfaces will be available in the
column labeled “Available WAN IFs”.
Select the WAN IFs, to be utilized for DNS
Resolution, and move them to the column
labeled “Selected DNS Server Interfaces”.
WAN DNS Interfaces are prioritized from the
top down. In order to change the prioritization
order, you must remove the interfaces and
place them in the desired order.
Step 3 When finished, select “ Apply / Save “.
VisionNet M504 / M505N R3 Page 42 of 62 User Manual Rev 0.1c
To Next Page
Loading...
