30MlN
S86086
Instruments and controls
58
Instrument panel
Code lock (optional equipment)
The machine can be equipped with theft protection in the form of a
code lock which prevents start of the machine without the correct
four-digit code.
NOTE:
Do not forget the code. It can only be programmed and
changed via VCADS Pro. If you forget the code, contact your
dealer.
Unlocking the code lock.
—
Enterthefour-digitcode (consists of the digits 0, 1, 2 and 3) and
press the acknowledgement button for more than 1 second.
If it is correct, the start up screen is shown.
If it is incorrect, the first screen is shown again. After four, failed at-
tempts to enter the correct code, the system will be locked for ten
minutes and the first screen is still shown if the ignition key is in
running position. After ten minutes, another four attempts to enter
the correct code are possible.
Code lock setting
The code lock setting of the code lock function is shown when
pressing arrow right on the time/date screen (see previous page).
+ + +,.,
0123
+ +-ø..,
0123
*
•
+-.,
0123
**
•
+ -,
0123
***
•
+ -0../
0123
* * * *_'
1H
VOLVO
•
EC210B
S86 193
0123
+ +•%/
0123
*
0123
**
+ +
4
"./
0123
***
+ +.ss,
0123
* * * * .,
The code lock is unlocked for 30 minutes after the engine has been
shut off. After this period, the code has to be entered again.
0MlN
S86067
The code lock is locked as soon as the engine is shut off.
Changing the code lock setting
Change from one setting to another with arrow up or arrow down
and press the acknowledgement button for more than 1 second.
4-
S$6194
To Next Page
Loading...
