The automatic system releases the brakes when the
clutch is released, or when the engine torque is
sufficiently great.
Deactivate the function by pressing the button again.
The function is always deactivated when the starter
key is turned to the 0–position.
Only use the function on uphill inclines.
1 Keep the vehicle stationary with the footbrake.
2 Press the switch.
The function is activated and the lamp in the
switch lights.
3 Release the footbrake.
The vehicle automatically stays still for a short
time.
The symbol in the display lights as long as the
vehicle is kept braked.
4 Start to accelerate
The automatic system releases the brakes after a short
time, or when the engine torque is sufficiently great.
Deactivate the function by pressing the button again.
When the engine is started
the function is always disengaged.
Only use the function on uphill inclines.
J5013669
Symbol on the switch and display
Reversing camera
Turn on the camera
Engage reverse gear
or
Press the button
(In cold weather there may be a short delay before a
good picture is obtained.)
J0010217
Driving
131
To Next Page
Loading...
