Total value
The total values show the engine's total values to date,
logged during the lifetime of the engine control unit.
The values that are saved are
• Total distance
• Total fuel used
• Total engine hours
• Total idle time
• Total PTO hours
• Total engine revolutions
Scroll between values with ▲ and ▼. Return to
previous menu with "Esc".
If the transfer should fail, then "No data" is shown
when data is missing.
Trip data
There are 14 different trip values stored.
• Trip distance
• Trip fuel avg
• Trip fuel acc
• Trip overrevolutions
• Trip uneconomy rev's
• Trip fuel uneconomy rev's
• Trip average speed
• Trip overspeed:
• Trip engine hours
• Trip idle time
• Trip idle fuel
• Trip PTO hours
• Trip PTO fuel
• Trip cruise
Note!
In the menu "Trip data" you can find
information saved since the last
reset. To reset, see “Reset Trip data”.
Information display
73
To Next Page
Loading...
