Cab tilt pump
Oil recommendations
Oil grade Oil change
Cab tilt pump Hydraulic oil BLV Only in connection with
repairs.
Checking the oil level
Check the oil level with the cab in the driving position.
1 To check the oil level in the cab tilt pump, the
panel in front of the foot step must be removed
2 Place the pump rod for the cab tilt pump in its
rearmost position
3 Check that the oil level for the cab tilt pump is in
the centre of the level glass (B)
4 Top up with oil as necessary. Filler plug at (A)
The oil only needs to be changed in connection with
repairs.
J1007364
Central lubrication
The central lubrication provides automatic lubrication,
which would otherwise be done at service intervals.
The advantages of this is that you get a more even
lubrication at all locations and the service occasions
are fewer.
The lubrication takes place during driving at 9 hour
intervals. The lubrication is also activated if the
vehicle has been stationary for more than 48 hours.
Manual lubrication
The central lubrication can be activated manually with
a switch under the pump's plastic cover on the main
unit.
If in doubt of the function of the central lubrication,
check the fuse and do manual lubrication.
604
Maintenance
To Next Page
Loading...
