If the ACC does not work
ACC
ACC will not function while the radar sensor is
warming up in low temperatures, or if it is very dirty
or covered with snow or ice.
Heavy vehicles
ACC will not function if the braking system (EBS) has
not managed to calculate the total weight of the load
after starting.
Note!
A few short brake stops will speed
up the calculation.
When it is too cold
Wait until the sensor warms up and the symbol goes
out.
J2021177
When the sensor is dirty
Clean the front of the radar sensor. The radar sensor is
located in a recess on the left side of the lower front of
the truck.
J2021176
Calibration
When the truck is started, calibration is performed on
the
ACC
. Calibration only takes a few seconds.
Note!
Wait until the
ACC
is calibrated
before driving away.
204
Adaptive cruise control
To Next Page
