• Disengage the PTO
• Apply the parking brake
• Move the gear lever to N
• Turn off the engine and restart it
High range lock-up
(Option)
High range lock-up is used when a power take-off is
installed in the drive train. When the gearbox is in
neutral (gear selector in N position) and the drive train
power take-off is engaged, the gearbox will start in the
highest gear. The lock-up clutch locks already at low
speeds.
Engage the drive train power take-off
1 The engine must be idling at low speed
2 Move the gear shift lever to N
3 Apply the parking brake
4 Engage the power take-off in the drive train
5 Wait until HS is shown in the display (High
range lock-up Standby)
6 Move the gear shift lever to position A (or M)
7 Wait until HR is shown in the display (High
range lock-up Running)
8 Increase the engine speed to the desired speed
9 The C will disappear when the engine speed is
increased (the engine speed depends on whether
the gear shift lever is in the A or M position)
Driving
181
To Next Page
Loading...
