Starting instructions
Put the gear selector in the neutral or tilted position or
the engine will not start.
When the air pressure to the gearbox is too low, a
warning will be displayed automatically. An icon will
appear on the display at the same time as the
information lamp comes on. Wait until the lamp has
gone out before driving off.
Information lamp
Symbol for low air pressure to
gearbox
Starting instructions
Put the gear shift lever in the neutral or tilted position,
otherwise the engine will not start.
If the air pressure to the gearbox is too low, a warning
will be shown automatically in the display. An icon
will appear in the display at the same time as the
information lamp lights. Wait until the lamp has gone
out before driving off. Then move the gear shift lever
to A, M or R to be able to drive.
J3014466
Information lamp
J3008849
Icon for low air pressure to gearbox
Start the truck
To start the truck, select neutral position N and turn
the key. The truck cannot be started if the gear shift
lever is in the A, M or R position.
Starting and stopping
5
To Next Page
Loading...
