trailer, the starting gear should be adjusted
manually if it is too high.
•
ESP
(electronic stability program) on trucks with
EBS Gen 3
(manufactured from week 335). The
ESP
function will have a reduced functionality if
trailer detection is turned off.
•
EBS
will have difficulty in calculating the correct
total weight after coupling/uncoupling of a trailer,
which can result in variable braking feeling.
• The warning in the display that the trailer has no
ABS
will not function. The warning that the trailer's
ABS
is out of order is not affected (it functions).
•
LCM
(lighting control module) will no longer
report fault codes to the combination instrument, a
situation that can occur with faults in the trailer
lighting power outlet.
Day running lights automatic
Day running lights automatic can be switched off in
this menu. This means that if the day running lights
automatic is “Off”, you must switch the dipped beams
on and off with the lights knob in the panel.
1 Select “On” or “Off” with ▲ and ▼.
2 Confirm with “SELECT”.
3 “Esc” cancels the setting.
Draining/priming
Draining/priming of the fuel system is done via this
menu, when required.
Depending on whether it is draining or priming that is
required, the display will show different messages. An
icon is shown together with the text "Draining/priming
request". The display also shows if draining or priming
is not allowed.
The following conditions must be met before draining/
priming can be carried out:
J3016141
Draining
68
Information display
To Next Page
Loading...
