• Step backwards with "Esc"
If the starter key is in stop position and it takes more
than 30 seconds between button depressions, the
setting is aborted.
Alarm clock
The menu "Alarm Clock" is available even when the
starter key is in stop position. The menu is activated by
pressing any of the buttons on the control unit for at
least 1 second. The menu remains active for 30
seconds after the last depression.
The alarm clock cannot be set when driving, but the
buzzer that sounds when triggered can be shut off by
pressing "Esc".
Alarm clock, setting
1 Press "SELECT".
2 Move the cursor to NEW TIME using ▲ and ▼.
3 Confirm with "SELECT".
4 Enter the alarm time
Set the first digit with ▲ and ▼
Step to the next digit using "SELECT"
Step backwards with ”Esc”
5 ”ON” is then marked. Confirm with "SELECT".
The symbol to the right is shown on the status bar
to indicate that the alarm clock is active.
If the starter key is in stop position and it takes more
than 30 seconds between button depressions, the
setting is aborted.
J3013619
Activate alarm clock
Activating the alarm clock without changing alarm
time:
1 Press "SELECT".
2 Move the cursor to "ON" using ▲ and ▼.
3 Confirm with "SELECT".
52
Information display
To Next Page
Loading...
