10 Lower the jack's hydraulic piston
11 Screw down the adjustable part of the jack
12 Place the other wooden block under the axle
casing
13 Place the jack on the wooden block
14 Screw up the jack's adjustable part until it makes
contact with the support surface under the axle
15 Raise the axle with the jack so that the wheel is
free from the ground
16 Leave the standing wooden block in place until
the spare wheel is fitted
17 Remove the wheel bolts completely
18 Lift off the wheel
Lower the axle by first lowering it onto the standing
wooden block. Remove the lying wooden block. Then
screw up the adjustable part of the jack and lift the
axle sufficiently to remove the standing wooden block.
Lower the axle completely.
J7009732
J7009733
Disc wheel for disc brakes
J7008363
1 Rim
2 Disc
600
Maintenance
To Next Page
