6 Release the switches.
7 Release the brake pedal.
The new idling speed is set.
If an error has been made during the adjustment
sequence the previous idling speed will be retained.
Fuel heater
Trucks equipped with
Fuel Heater
have electrically
heated fuel lines which prevents the fuel from freezing
on its way to the engine.
Fuel Heater
is used in
extreme cold conditions to heat the fuel before starting
and while driving.
Activate the function by pressing in the switch in the
instrument panel. For the fuel to be warmed up before
starting, the function should be activated at least
5 minutes
before starting.
Fuel Heater
is active as long as the switch is held
pressed in, but the effect varies according to needs.
The function is switched off automatically when the
ignition is switched off.
J192368
Switch for fuel heater
12
Starting and stopping
To Next Page
Loading...
