Replacement bulbs Watts (W) Base
Side flashers 21 BAY 9 s
Position marking lights 5 BA 15 s
Courtesy lamp, above the bed 10 BA 15 s
Courtesy lamp, general lighting 10 BA 15 s
roof, ”spot” lamps 10 BA 15 s
doors 5 BA 15 s
Cigarette lighter illumination 1,2 E15
Ashtray illumination 2 E20
Engine wash
Use hot water when washing the engine and use a
high-pressure washer with caution. Avoid flushing
water on electrical components.
Washing the chassis
The chassis should, as well as the cab, be washed as
soon as it has become dirty. Be especially careful,
when washing with high pressure, of axles, joints and
other moving parts where water and dirt can be forced
in. Avoid flushing away any lubrication. If this should
happen, be extra careful to re-lubricate the
components.
Note!
Never flush water directly on
sealings/gaskets.
Wash the cab
The vehicle should be washed as soon as it becomes
dirty, especially during the winter when road salt and
dampness otherwise cause corrosion.
To avoid paint damage and to achieve good results
when washing, the following should be paid attention
to:
Washing method: Use a high pressure washer if
available. For dirt that cannot be removed with this
516
Maintenance
To Next Page
Loading...
