1 Make sure none of the wheels are spinning
2 Depress the clutch pedal
3 Engage the differential lock
4 Release the clutch pedal
5 Accelerate carefully so that the driveshafts and
gears are not damaged
6 Drive away from the slippery area
7 Release the accelerator
8 Disengage the differential lock
J4017788
The differential lock is engaged. The
lamp on the instrument panel
flashes.
Note!
The differential lock is not engaged
until the warning lamp on the
instrument panel flashes. The
differential lock is engaged as long
as the warning lamp is flashing,
even if the switch is turned off.
1 Make sure none of the wheels are spinning
2 Depress the clutch pedal
3 Engage the differential lock
4 Release the clutch pedal
5 Accelerate carefully so that the driveshafts and
gears are not damaged
6 Drive away from the slippery area
7 Release the accelerator
8 Disengage the differential lock
J4017789
First position, differential lock in
transfer gearbox engaged. The lamp
138
Driving
To Next Page
Loading...
