R Reverse. The truck must be stationary when selecting R.
N Neutral position. No gear engaged.
A Automatic programme. The gearbox will automatically
select the correct gear with respect to load, incline, speed
and throttle.
M Manual program. Changing up and down is done with the
+/- button on the gear lever.
F Tilted.
Tilting the gear selector
The gear lever can be tilted to horizontal position to
allow easy movement between the driver's seat and
other parts of the cab.
To tilt the selector:
• Make sure the selector is in neutral position N
• Press in the button on top of the gear lever and tilt
the lever forwards, past the reverse position R, to
the horizontal position
To raise the selector for driving:
• Move the selector up, past the reverse position R,
until it locks in neutral N
J4020429
218
I-Shift
To Next Page
Loading...
