Measures after spillage
With contact with the skin – rinse with plenty of water
and remove contaminated clothing.
With contact with the eyes, rinse thoroughly with
water for several minutes Call for medical help if
necessary.
If inhaled – breathe fresh air and call for medical help
if necessary.
Do not allow
AdBlue
to come into contact with other
chemicals.
AdBlue
is not flammable. If
AdBlue
is exposed to
high temperatures, it will be reduced to ammonia and
carbon dioxide.
If
AdBlue
is spilled on the truck, wipe off the excess
and rinse with water.
AdBlue
is corrosive with metals
such as copper and aluminium. It can also cause
damage to alloys such as brass.
Spilled solution can form white crystals of
concentrated
AdBlue
on the truck. Rinse the crystals
away with water.
If spilt on a connector, the connector must be replaced,
AdBlue
is highly corrosive and will therefore damage
the connector.
J9008510
Note!
Urea spill must not be allowed to
enter the normal drainage system.
Caution!
Urea spilt on hot components can
quickly generate vapour. Turn
your face away!
298
Exhaust cleaning
To Next Page
