Setting the desired temperature
• Open all the ventilation nozzles
• Set the fan (3) to AUT
• Set air distribution (5) to AUT
• Set desired temperature (2)
In order to rapidly reach the desired temperature with
changes, a temporary, extreme increase or decrease of
temperature is made, at the same time as the fan speed
is increased.
The set temperature cannot be measured using a
normal thermometer. The AC takes into account,
among other things, the outside temperature and
sometimes speed. The temperature on the control is
therefore the experienced temperature and not that
which a normal thermometer would register.
J200692
As cool as possible
• Open all the ventilation nozzles
• Set the fan to AUT
• Set the air distribution in AUT
• Set the temperature as cold as possible
When the temperature control is at an end position and
the fan is set to AUT, the system will provide the
maximum fan speed.
When it is hot outside, it is normal that water drips
from the truck. This is harmless condensation coming
from the air conditioning.
J200693
Cab
321
To Next Page
Loading...
