Symbol Meaning Symbol Meaning
Too high concentration of soot
particles or ash in the particulate
filter. See section “Particulate filter”
for more information.
Parking brake applied
Air filter clogged. Check that the net
in the air intake is not clogged.
Brake pressure low
Engine is switched off Clutch running hot
Cab tilt lock open Temperature, hydraulic
retarder
The compressor charge is unusually
high. The cause could be an air leak.
• If the symbol is shown together
with the information symbol (i),
the leak is so large that fuel
consumption
is increased.
• If the symbol is displayed
together with the check symbol
(CHECK), then the leak is so
large that it can cause an
unplanned stop if not remedied.
Risk of moisture in the pneumatic
system. There are several causes:
• Time to replace the desiccant
element.
• The compressor is being used to
much.
• Fault with the air system.
Fault in trailer EBS function Leakage from indicated tyre/axle.
This warning may also occur after
changing tyres. Disable by
unscrewing the hose to the tyre
pressure sensor on the tyre in
question, wait for a minute and then
screw on again. (Key in drive
position)
Connected trailer without ABS High tyre pressure
Information display
85
To Next Page
Loading...
