VTech VNT832 - Page 23

19
Congure your router
Setup
• Channel mode: It can be Bridge, IPoE or PPPoE.
• Enable NAPT: Enable or disable the NATP function.
• PPP User Name: User name of the PPP connection
• PPP Password: Password of the PPP connection.
• Type (PPP settings): Continuous, Manual or Connect On Demand.
• Idle Time (min): The idle time of the PPP connection when the
type is Connect On Demand.
• Type (WAN IP settings): Fixed or DHCP.
• Local IP address: The IP address of the router.
• Remote IP address: The gateway’s IP address of the router.
• NetMask: The subnet mask of the router.
• Default Route: The mode of the default route of the router.
• Unnumbered: Enable or disable IP unnumbered interface
mode.