VTech VNT832 - Time

61
Congure your router
Maintenance
Time
Simple Network Timing Protocol (SNTP) is a protocol used to
synchronize the system time with the public SNTP server.
System time conguration:
Click the Time sub-menu in the left pane. The System Time
Conguration page opens. On this page, you can congure the
system time.
• Server/Server2: The IP address or the host name of the NTP
server.
• Interval: The interval time of NTP function
• Time Zone: The time zone in which the device resides.
• When you set the NTP conguration correctly, press the button
Get GMT Time to start the NTP function. Then, you can see the
GMT time obtained from NTP server.