31
Congure your router
Setup
WLAN: Wi-Fi Protected Setup
In the left pane, click WPS. The Wi-Fi Protected Setup page opens.
WPS is a convenient method for wireless clients to connect to the
network.
• Disable WPS: Click to disable Wi-Fi Protected Setup. Other
methods of authentication will apply, such as entering a WPA2
passphrase.
• WPS Status: Congured, Uncongured.
• Self-PIN Number: Set the 8-digit PIN that must be entered for
clients to connect. The default PIN is provided on the label on
the bottom of the router.
• Push Button Conguration: Click the PBC button to start Wi-
Fi Protected Setup. You have two minutes to nd the available
wireless network on your device and connect to the router (you
may also need to enter the PIN).
• Start PIN: Enter the client device’s WPS PIN. After saving
the client-generated WPS PIN, the client device can discover
this router (some devices will display “WPS available” with the
network name) in its list of detected networks. You can then
easily connect to the router on your client device.
To Next Page
Loading...
Need help?
General