VTech VNT832 - Route: RIP Configuration

34
Congure your router
Advanced
Route: RIP Conguration
Click RIP in the left pane. The RIP Conguration page opens.
Routing Information Protocol (RIP) is an internet protocol you can
setup to share routing table information with other routing devices.
On this page, you can congure the RIP settings such as enabling or
disabling the RIP function.
• RIP: Enable or disable the RIP function of the router.
• Interface: The interface on which you want to enable RIP.
• Recv Version: Indicates the RIP version in which information
must be passed to the device it can be accepted into its routing
table.
• Send Version: Indicates the RIP version this interface will use
when it sends its route information to the other device.
• The RIP Cong List shows the current RIP setting of the
device.