VTech VNT832 - NAT: NAT Port Trigger

38
Congure your router
Advanced
NAT: NAT port trigger
Click Port Trigger in the left pane. Port trigger is used to restrict
certain types of data packets from your local network to the internet.
Use of such lters can be helpful in securing and restricting your local
network. On this page, you can congure the port trigger rules.
• Nat Port Trigger: Enable or disable the port trigger function on
the device.
• Application Type: Select the service from the Usual Application
Name or dene the name from User-dened Application Name.
• Start Match Port / End Match port: The start and end port to
match.
• Trigger Protocol: The protocol to trigger the rule. It can be TCP,
UDP or TCP/UDP.
• Start Relate Port / End Relate Port: The start and end relate port.
• Open Protocol: It can be TCP, UDP or TCP/UDP.
• NAT Type: It can be outgoing or incoming.