VTech VNT832 - Page 30

26
Congure your router
Setup
• SSID Type: Root, VAP0, VAP1, VAP2, VAP3. Selecting Virtual
Access Points VAP0 to VAP3 disables the security settings on
this page. You must congure Virtual Access Points and VAP
security on the MBSSID page.
• Encryption: Select the encryption type: WPA2 Mixed,
WPA2(TKIP) WPA2(AES), WPA(AES), WPA(TKIP), WEP, None.
None is not recommended except for certain conguration or
troubleshooting situations.
• If you select WEP you must congure key length, key format,
default Tx key, and encryption keys 1 to 4 (use the same
number of characters for each key).
• Use 802.1x Authentication Mode: Select the authentication
mode: Enterprise (RADIUS) or Personal (Pre-Shared Key).
Select Enterprise (RADIUS) if using an external RADIUS server
to authenticate clients.
• Pre-Shared Key Format: Select the pre-shared key format:
Passphrase or Hex (64 characters). Passphrase can contain
a–z, A–Z, 0–9, and symbols. Hex can contain 0–9, and upper
case letters A–F.
• Pre-Shared Key: Enter the key for WPA or WEP authentication,
from 8 to 63 characters.
• Authentication RADIUS Server: Enter the RADIUS server
settings if using the RADIUS server for wireless client
authentication. Port, IP address, Password