Wacker Neuson 28Z3

3-66 SHB 28Z3 EN – Edition 2.0 * 28z3s314.fm
Maintenance
3.27 Fire extinguisher
A fire extinguisher is neither included in the machine's standard equipment nor is it availa-
ble as an option from Wacker Neuson.
☞ Retrofitting a fire extinguisher according to DIN-EN 3 must be carried out by an author-
ised workshop.
Installation in cab:
➥ On the cab framework behind the seat (see Fig. 91)
➥ Drill 2 holes with the correct diameter through the trim and frame of the cab
➥ Remove the trims
➥ Cut 2 threads with the correct diameter in the drilled holes
➥ Install the trim
➥ Fasten a retaining bracket you have made yourself with corresponding screws and
washers
➥ Fasten the fire extinguisher onto the retaining bracket according to the manufac-
turer's indications
Notice!
Check the fire extinguisher at regular intervals, also ensure that it is safely
mounted.
Installation in canopy:
➥ On the canopy framework behind the seat (see Fig. 92)
➥ Fasten the fire extinguisher according to the manufacturer's indications
Notice!
Check the fire extinguisher at regular intervals, also ensure that it is safely
mounted.
Fig. 91: Fire extinguisher in cab
Fig. 92: Fire extinguisher in canopy