Wacker Neuson 28Z3

8-12 SHB 28Z3 EN – Edition 2.0 * 28z3s810.fm
PowerTilt PTS06
8.8 Removing the end cap, securing ring and internal decompression valve
☞ Remove connecting plug g from the end of the shaft
☞ Remove the internal decompression valve 11.
☞ Remove the O-ring of securing ring A10 from shaft 2.
☞ Remove end cap 4 with two pins and a long mounting lever from the shaft.
☞ Remove pressure disc B5 from end cap 4 or the housing collar.
Fig. 12: Removing the connecting plug
g
Fig. 13: Removing the internal decompression valve
11
Fig. 14: Removing the O-ring of the securing ring from the
shaft
A10
Fig. 15: Removing the end cap from the shaft
Fig. 16: Removing the pressure disc
B5